Adjunctive intravitreal dexamethasone in the treatment of acute endophthalmitis following cataract surgery

Edward F Hall1, Garrett R Scott1, David C Musch1,2, David N Zacks11Department of Ophthalmology and Visual Sciences, Medical School; 2Department of Epidemiology, School of Public Health; University of Michigan, Ann Arbor, MI, USAPurpose: Controversy exists regarding the use of intravitreal dexamethasone (IVD) as an anti-inflammatory adjunct to intravitreal antibiotics in patients with acute endophthalmitis following cataract surgery. The purpose of this project was to evaluate our experience regarding the effect of adjunctive IVD use on visual outcomes in such patients.Design: Retrospective, comparative case series.Methods: Study population: Patients treated for acute endophthalmitis following cataract surgery from 1995–2004. Intervention: In addition to standard intravitreal antibiotic treatment, some patients also received a single adjunctive injection of IVD. Primary outcome measures: Median visual acuity at last follow-up and percentage of patients achieving a ≥3-line improvement in visual acuity. Secondary outcome measures: Inflammatory index scoring, including amount of cell and flare, height of hypopyon, and presence of fibrin as a function of time after treatment.Results: Twenty-six eyes were treated with and 38 eyes without adjunctive IVD. Median presenting visual acuity was Hand Motion in both groups. Median visual acuity at last followup measured 20/40 in the IVD group and 20/50 in the No-IVD group (p = 0.75). Seventy-three percent of patients in the IVD group and 82% of patients in the No-IVD group achieved a ≥3-line improvement in visual acuity (p = 0.42). No significant difference was detected between the IVD and No-IVD groups for any of the three measures of inflammation.Conclusion: The use of IVD did not significantly improve the final median visual acuity, the chance of achieving a ≥3-line improvement in visual acuity, or the amount of intraocular inflammation. Based on these findings, and the possible detrimental effect of IVD on visual outcomes previously reported in the literature, the use of IVD does not appear to be warranted as a routine adjunctive treatment in postoperative endophthalmitis.Keywords: endophthalmitis, dexamethasone, intravitreal injectio

Transatlantic collection of health informatics competencies

The electronic collection, processing and management of information is becoming increasingly important in healthcare. Because of the nature of the healthcare provision and delivery process, where the health, safety and quality of human lives are impacted on a daily basis, it is critical that those who work in the field are competent and able to perform all clinical, administrative, research and technology-impacted facets of their roles.The United States and the European Union have been working to encourage broader and more effective use of Information and Communications Technology (ICT) within healthcare. The development, use and governance of ICT within healthcare, often called health informatics, requires a number of competences which need to be identified and integrated into relevant skills assessment, education and training. Ultimately, this will help produce a more proficient and a more confident mobile health informatics-empowered workforce.A structured set of health information technology and eHealth implementation competences was collected in a co-operation project by voluntary experts in USA and European Union. The project took a deliberately broad starting point, seeking and reviewing an extensive range of related competencies. The skills cover the following domains of professions working with health information technology: direct patient care; administrative; engineering/information, communication, and technology (ICT); informatics; and research and biomedicine. The aggregation of over one thousand competencies was classified to a baseline set of skills and four levels of expertise in 33 focus areas according to Bloom’s taxonomy. The data set also contains definitions of 268 ‘typical’ professional roles. The use of the collection of competencies is supported by an open access web tool through which all the competencies can be searched through a query mechanism.The limitation of this work is that only the Acute Care segment of roles and competencies impacted by ICT was evaluated within the scope of this project, however, this subset of other care settings such as ambulatory, rehabilitative care, surgery, and others serves as a representative set of roles and competencies within the health care field as well as a being an important proof of concept for future usefulness of the work if extended beyond its current span. This project has made a contribution to the potential improvement of workforce mobility internationally

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

Impact of fast ions on density peaking in JET : fluid and gyrokinetic modeling

The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET discharges in different regimes are analyzed at the radial position rho(t) = 0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile

Impact of fast ions on density peaking in JET: fluid and gyrokinetic modeling

The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/ trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET discharges in different regimes are analyzed at the radial position ρ$_{t}$=0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures

Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings

The erosion, transport and deposition of tungsten in the outer divertor of JET-ILW has been studied for an HMode discharge with low frequency ELMs. For this specific case with an inter-ELM electron temperature at the strike point of about 20 eV, tungsten sputtering between ELMs is almost exclusively due to beryllium impurity and self-sputtering. However, during ELMs tungsten sputtering due to deuterium becomes important and even dominates. The amount of simulated local deposition of tungsten relative to the amount of sputtered tungsten in between ELMs is very high and reaches values of 99% for an electron density of 5E13 cm$^{-3}$ at the strike point and electron temperatures between 10 and 30 eV. Smaller deposition values are simulated with reduced electron density. The direction of the B-field significantly influences the local deposition and leads to a reduction if the E×B drift directs towards the scrape-off-layer. Also, the thermal force can reduce the tungsten deposition, however, an ion temperature gradient of about 0.1 eV/mm or larger is needed for a significant effect. The tungsten deposition simulated during ELMs reaches values of about 98% assuming ELM parameters according to free-streaming model. The measured WI emission profiles in between and within ELMs have been reproduced by the simulation. The contribution to the overall net tungsten erosion during ELMs is about 5 times larger than the one in between ELMs for the studied case. However, this is due to the rather low electron temperature in between ELMs, which leads to deuterium impact energies below the sputtering threshold for tungsten

Determination of tungsten sources in the JET-ILW divertor by spectroscopic imaging in the presence of a strong plasma continuum

The identification of the sources of atomic tungsten and the measurement of their radiation distribution in front of all plasma-facing components has been performed in JET with the help of two digital cameras with the same two-dimensional view, equipped with interference filters of different bandwidths centred on theW I (400.88 nm) emission line. A new algorithm for the subtraction of the continuum radiation was successfully developed and is now used to evaluate the W erosion even in the inner divertor region where the strong recombination emission is dominating over the tungsten emission. Analysis of W sputtering and W redistribution in the divertor by video imaging spectroscopy with high spatial resolution for three different magnetic configurations was performed. A strong variation of the emission of the neutral tungsten in toroidal direction and corresponding W erosion has been observed. It correlates strongly with the wetted area with a maximal W erosion at the edge of the divertor tile

Tritium distributions on W-coated divertor tiles used in the third JET ITER-like wall campaign

Tritium (T) distributions on tungsten (W)-coated plasma-facing tiles used in the third ITER-like wall campaign (2015–2016) of the Joint European Torus (JET) were examined by means of an imaging plate technique and β-ray induced x-ray spectrometry, and they were compared with the distributions after the second (2013–2014) campaign. Strong enrichment of T in beryllium (Be) deposition layers was observed after the second campaign. In contrast, T distributions after the third campaign was more uniform though Be deposition layers were visually recognized. The one of the possible explanations is enhanced desorption of T from Be deposition layers due to higher tile temperatures caused by higher energy input in the third campaign